Usage

Khal offers a set of commands, most importantly list, calendar, interactive, new, printcalendars, printformats, and search. See below for a description of what every command does. khal does currently not support any default command, i.e., run a command, even though none has been specified. This is intentional.

Options

khal (without any commands) has some options to print some information about khal:

--version

Prints khal’s version number and exits

-h, --help

Prints a summary of khal’s options and commands and then exits

Several options are common to almost all of khal’s commands (exceptions are described below):

-v, --verbosity LVL

Configure verbosity (e.g. print debugging information), LVL needs to be one of CRITICAL, ERROR, WARNING, INFO, or DEBUG.

-l, --logfile LOFILE

Use logfile LOGFILE for logging, default is logging to stdout.

-c CONFIGFILE

Use an alternate configuration file.

-a CALENDAR

Specify a calendar to use (which must be configured in the configuration file), can be used several times. Calendars not specified will be disregarded for this run.

-d CALENDAR

Specify a calendar which will be disregarded for this run, can be used several times.

--color/--no-color

khal will detect if standard output is not a tty, e.g., you redirect khal’s output into a file, and if so remove all highlighting/coloring from its output. Use --color if you want to force highlighting/coloring and --no-color if you want coloring always removed.

--format FORMAT

For all of khal’s commands that print events, the formatting of that event can be specified with this option. FORMAT is a template string, in which identifiers delimited by curly braces ({}) will be expanded to an event’s properties. FORMAT supports all formatting options offered by python’s str.format() (as it is used internally). The available template options are:

title

The title of the event.

description

The description of the event.

description-separator

A separator: “ :: “ that appears when there is a description.

uid

The UID of the event.

start

The start datetime in datetimeformat.

start-long

The start datetime in longdatetimeformat.

start-date

The start date in dateformat.

start-date-long

The start date in longdateformat.

start-time

The start time in timeformat.

end

The end datetime in datetimeformat.

end-long

The end datetime in longdatetimeformat.

end-date

The end date in dateformat.

end-date-long

The end date in longdateformat.

end-time

The end time in timeformat.

repeat-symbol

A repeating symbol (loop arrow) if the event is repeating.

alarm-symbol

An alarm symbol (alarm clock) if the event has at least one alarm.

location

The event location.

calendar

The calendar name.

calendar-color

Changes the output color to the calendar’s color.

start-style

The start time in timeformat OR an appropriate symbol.

to-style

A hyphen “-” or nothing such that it appropriately fits between start-style and end-style.

end-style

The end time in timeformat OR an appropriate symbol.

start-end-time-style

A concatenation of start-style, to-style, and end-style OR an appropriate symbol.

end-necessary

For an allday event this is an empty string unless the end date and start date are different. For a non-allday event this will show the time or the datetime if the event start and end date are different.

end-necessary-long

Same as end-necessary but uses datelong and datetimelong.

status

The status of the event (if this event has one), something like CONFIRMED or CANCELLED.

status-symbol

The status of the event as a symbol, or or ?.

partstat-symbol

The participation status of the event as a symbol, or or ?.

cancelled

The string CANCELLED (plus one blank) if the event’s status is cancelled, otherwise nothing.

organizer

The organizer of the event. If the format has CN then it returns “CN (email)” if CN does not exist it returns just the email string. Example: ORGANIZER;CN=Name Surname:mailto:name@mail.com returns Name Surname (name@mail.com) and if it has no CN attribute it returns the last element after the colon: ORGANIZER;SENT-BY=”mailto:toemail@mail.com”:mailto:name@mail.com returns name@mail.com

url

The URL embedded in the event, otherwise nothing.

url-separator

A separator: “ :: “ that appears when there is a url.

duration

The duration of the event in terms of days, hours, months, and seconds (abbreviated to d, h, m, and s respectively).

repeat-pattern

The raw iCal recurrence rule if the event is repeating.

all-day

A boolean indicating whether it is an all-day event or not.

categories

The categories of the event.

By default, all-day events have no times. To see a start and end time anyway simply add -full to the end of any template with start/end or duration, for instance start-time becomes start-time-full and will always show start and end times (instead of being empty for all-day events).

In addition, there are colors: black, red, green, yellow, blue, magenta, cyan, white (and their bold versions: red-bold, etc.). There is also reset, which clears the styling, and bold, which is the normal bold.

A few control codes are exposed. You can access newline (nl), ‘tab’, and ‘bell’. Control codes, such as nl, are best used with –list mode.

Below is an example command which prints the title and description of all events today.

khal list --format "{title} {description}"
--json FIELD ...

Works similar to --format, but instead of defining a format string a JSON object is created for each specified field. The matching events are collected into a JSON array. This option accepts the following subset of --format template options:

title, description, uid, start, start-long, start-date,
start-date-long, start-time, end, end-long, end-date,
end-date-long, end-time, start-full, start-long-full,
start-date-full, start-date-long-full, start-time-full,
end-full, end-long-full, end-date-full, end-date-long-full,
end-time-full, repeat-symbol, location, calendar,
calendar-color, start-style, to-style, end-style,
start-end-time-style, end-necessary, end-necessary-long,
status, cancelled, organizer, url, duration, duration-full,
repeat-pattern, all-day, categories

Note that calendar-color will be the actual color name rather than the ANSI color code, and the repeat-symbol, status, and cancelled values will have leading/trailing whitespace stripped. Additionally, if only the special value all is specified then all fields will be enabled.

Below is an example command which prints a JSON list of objects containing the title and description of all events today.

khal list --json title --json description
--day-format DAYFORMAT

works similar to --format, but for day headings. It only has a few options (in addition to all the color options):

date

The date in dateformat.

date-long

The date in longdateformat.

name

The date’s name (Monday, Tuesday,…) or today or tomorrow.

If the –day-format is passed an empty string then it will not print the day headers (for an empty line pass in a whitespace character).

dates

Almost everywhere khal accepts dates, khal should recognize relative date names like today, tomorrow and the names of the days of the week (also in three letters abbreviated form). Week day names get interpreted as the date of the next occurrence of a day with that name. The name of the current day gets interpreted as that date next week (i.e. seven days from now).

If a short datetime format is used (no year is given), khal will interpret the date to be in the future. The inferred it might be in the next year if the given date has already passed in the current year.

Commands

list

shows all events scheduled for a given date (or datetime) range, with custom formatting:

khal list [-a CALENDAR ... | -d CALENDAR ...]
[--format FORMAT] [--json FIELD ...] [--day-format DAYFORMAT]
[--once] [--notstarted] [START [END | DELTA] ]

START and END can both be given as dates, datetimes or times (it is assumed today is meant in the case of only a given time) in the formats configured in the configuration file. If END is not given, midnight of the start date is assumed. Today is used for START if it is not explicitly given. If DELTA, a (date)time range in the format I{m,h,d}, where I is an integer and m means minutes, h means hours, and d means days, is given, END is assumed to be START + DELTA. A value of eod is also accepted as DELTA and means the end of day of the start date. In addition, the DELTA week may be used to specify that the daterange should actually be the week containing the START.

The –once option only allows events to appear once even if they are on multiple days. With the –notstarted option only events are shown that start after START.

Some examples

Including or excluding specific calendars:

  • khal list -d soccer will display events, in list form, from every calendar except “soccer.”

  • khal list -a soccer will display events, in list form, from only the “soccer” calendar.

Working with date ranges:

  • khal list -a soccer today 30d will show all events in next 30 days (from the “soccer” calendar).

  • khal list 2019-12-01 31d will show all all events for the 31 days following Dec 1, 2019.

at

shows all events scheduled for a given datetime. khal at should be supplied with a date and time, a time (the date is then assumed to be today) or the string now. at defaults to now. The at command works just like the list command, except it has an implicit end time of zero minutes after the start.

khal at [-a CALENDAR ... | -d CALENDAR ...]
[--format FORMAT] [--json FIELD ...]
[--notstarted] [[START DATE] TIME | now]

calendar

shows a calendar (similar to cal(1)) and list. khal calendar should understand the following syntax:

khal calendar [-a CALENDAR ... | -d CALENDAR ...] [START DATETIME]
[END DATETIME]

Date selection works exactly as for khal list. The displayed calendar contains three consecutive months, where the first month is the month containing the first given date. If today is included, it is highlighted. Have a look at khal list for a description of the options.

configure

will help users creating an initial configuration file. configure will refuse to run if there already is a configuration file.

import

lets the user import .ics files with the following syntax:

khal import [-a CALENDAR] [--batch] [--random-uid|-r] ICSFILE

If an event with the same UID is already present in the (implicitly) selected calendar khal import will ask before updating (i.e. overwriting) that old event with the imported one, unless –batch is given, than it will always update. If this behaviour is not desired, use the –random-uid flag to generate a new, random UID. If no calendar is specified (and not –batch), you will be asked to choose a calendar. You can either enter the number printed behind each calendar’s name or any unique prefix of a calendar’s name.

interactive

invokes the interactive version of khal, can also be invoked by calling ikhal. While ikhal can be used entirely with the keyboard, some elements respond if clicked on with a mouse (mostly by being selected).

When the calendar on the left is in focus, you can

  • move through the calendar (default keybindings are the arrow keys, space and backspace, those keybindings are configurable in the config file)

  • focus on the right column by pressing tab or enter

  • re-focus on the current date, default keybinding t as in today

  • marking a date range, default keybinding v, as in visual, think visual mode in Vim, pressing esc escapes this visual mode

  • if in visual mode, you can select the other end of the currently marked range, default keybinding o as in other (again as in Vim)

  • create a new event on the currently focused day (or date range if a range is selected), default keybinding n as in new

  • search for events, default keybinding /, a pop-up will ask for your search term

When an event list is in focus, you can

  • view an event’s details with pressing enter (or tab) and edit it with pressing enter (or tab) again (if [default] event_view_always_visible is set to True, the event in focus will always be shown in detail)

  • toggle an event’s deletion status, default keybinding d as in delete, events marked for deletion will appear with a D in front and will be deleted when khal exits.

  • duplicate the selected event, default keybinding p as in duplicate (d was already taken)

  • export the selected event, default keybinding e

In the event editor, you can

  • jump to the next (previous) selectable element with pressing tab (shift+tab)

  • quick save, default keybinding meta+enter (meta will probably be alt)

  • use some common editing short cuts in most text fields (ctrl+w deletes word before cursor, ctrl+u (ctrl+k) deletes till the beginning (end) of the line, ctrl+a (ctrl+e) will jump to the beginning (end) of the line

  • in the date and time fields you can increment and decrement the number under the cursor with ctrl+a and ctrl+x (time in 15 minute steps)

  • in the date fields you can access a miniature calendar by pressing enter

  • activate actions by pressing enter on text enclosed by angled brackets, e.g. < Save > (sometimes this might open a pop up)

Pressing esc will cancel the current action and/or take you back to the previously shown pane (i.e. what you see when you open ikhal), if you are at the start pane, ikhal will quit on pressing esc again.

new

allows for adding new events. khal new should understand the following syntax:

khal new [-a CALENDAR] [OPTIONS] [START [END | DELTA] [TIMEZONE] SUMMARY
[:: DESCRIPTION]]

where start- and enddatetime are either datetimes, times, or keywords and times in the formats defined in the config file. If no calendar is given via -a, the default calendar is used. new does not support -d and also -a may only be used once.

new accepts these combinations for start and endtimes (specifying the end is always optional):

  • datetime [datetime|time] [timezone]

  • time [time] [timezone]

  • date [date]

where the formats for datetime and time are as follows:

  • datetime = (longdatetimeformat|datetimeformat|keyword-date timeformat)

  • time = timeformat

  • date = (longdateformat|dateformat)

and timezone, which describes the timezone the events start and end time are in, should be a valid Olson DB identifier (like Europe/Berlin or America/New_York. If no timezone is given, the defaulttimezone as configured in the configuration file is used instead.

The exact format of longdatetimeformat, datetimeformat, timeformat, longdateformat and dateformat can be configured in the configuration file. Valid keywords for dates are today, tomorrow, the English name of all seven weekdays and their three letter abbreviations (their next occurrence is used).

If no end is given, the default length of one hour or one day (for all-day events) is used. If only a start time is given the new event is assumed to be starting today. If only a time is given for the event to end on, the event ends on the same day it starts on, unless that would make the event end before it has started, then the next day is used as end date

If a 24:00 time is configured (timeformat = %H:%M) an end time of 24:00 is accepted as the end of a given date.

If the summary contains the string ::, everything after :: is taken as the description of the new event, i.e., the “body” of the event (and :: will be removed).

Passing the option --interactive (-i) makes all arguments optional and interactively prompts for required fields, then the event may be edited, the same way as in the edit command.

Options

  • -l, –location=LOCATION specify where this event will be held.

  • -g, –categories=CATEGORIES specify which categories this event belongs to. Comma separated list of categories. Beware: some servers (e.g. SOGo) do not support multiple categories.

  • -r, –repeat=RRULE specify if and how this event should be recurring. Valid values for RRULE are daily, weekly, monthly and yearly

  • -u, –until=UNTIL specify until when a recurring event should run

  • –url specify the URL element of the event

  • –alarms DURATION,… will add alarm times as DELTAs comma separated for this event, DURATION should look like 1day 10minutes or 1d3H10m, negative DURATIONs will set alarm after the start of the event.

Examples

These may need to be adapted for your configuration and/or locale (START and END need to match the format configured). See printformats.

khal new 18:00 Awesome Event

adds a new event starting today at 18:00 with summary ‘awesome event’ (lasting for the default time of one hour) to the default calendar

khal new tomorrow 16:30 Coffee Break

adds a new event tomorrow at 16:30

khal new 25.10. 18:00 24:00 Another Event :: with Alice and Bob

adds a new event on 25th of October lasting from 18:00 to 24:00 with an additional description

khal new -a work 26.07. Great Event -g meeting -r weekly

adds a new all day event on 26th of July to the calendar work in the meeting category, which recurs every week.

edit

an interactive command for editing and deleting events using a search string

khal edit [--show-past] event_search_string

the command will loop through all events that match the search string, prompting the user to delete, or change attributes.

printcalendars

prints a list of all configured calendars.

printformats

prints a fixed date (2013-12-21 21:45) in all configured date(time) formats. This is supposed to help check if those formats are configured as intended.